0

NG-2 'PATHFINDER' full auto nerf blaster

pathfinder
€148.52
In stock
1
Product Details
Marke: my3dbase

NG-2 'PATHFINDER' full auto nerf blaster

The NG-2 'PATHFINDER' is a full auto blaster and based on the proven design of the semi auto 'GOBLIN'. The 'PATHFINDER' is a 100% custom designed, high performance, full auto flywheel blaster, designed to launch half length foam darts using standard talon mags. It is meant as back up blaster (side arm). Hence, the PATHFINDER is a very compact blaster.

  • Max. kinetic energy is <0.5 Joule.
  • Rate of fire is 900 darts/min

Note: basically any color combination is possible. Use this link https://tinyurl.com/ng2-goblin

to find your combo and send us a screenshot after the purchase. We will then make sure you get the colors that you chose.


Battery

We use a 2s lipo measuring 58x30x15 mm. Both the 'Graphene 2s 950mAh 65c' from Outofdarts and the 'Turnigy Graphene Panther 1000mAh 2s 75c' from Hobbyking also fit.

The main motor cage is ABS and not PLA. So you do not have to worry about heat that is generated by the motors.

The PATHFINDER has a voltage indicator integrated in the rear of the main body.

The handle features a safety switch to prevent accidental firering of the blaster.


Main features:

  • Operation: Full-automatic
  • Operating voltage: 7.2V (nominal), 2s LiIon setup
  • Material: ABS and PLA (and others)

What is in the package?

Fully assembled blaster with Xt60 connector. Plug and play. Talon mag and short darts are not included.


Color combinations

Basically any color combination is possible, click here . To find your combo and send us a screenshot after the purchase. We will then make sure you get the colors that you chose. Please note: The color picker does NOT feature an 'exact' representation of the filament colors. There will be slight missmatches.



Power supply

The motors are rated for a 2s setup (max 8.4V). Batteries are not part of this offer (difficulties with shipping etc). The blaster is equipped with a XT60 connectors.


DO NOT expose the blaster to heat (e.g. from sun). Temperatures above 45 °C will warp and permanently damage the product which is mainly made from PLA.


Legal disclaimer

Do not aim at eyes or face. Do not modify darts or dart blaster. This product is only intended to be used as outlined in the accompanying instruction manual. This item is not a toy, keep away from children. In no event, regardless of cause, shall my3dbase GmbH be liable for any indirect, special, incidental, punitive or consequential damages of any kind as a result of this product, whether arising under breach of contract, tort (including negligence), strict liability or otherwise, and whether based on this agreement or otherwise, even if advised of the possibility of such damages.

The kinetic energy of the blaster does to exceed 0.5 joule and no hot Gases are expelled from the device.

Magazine, darts and battery are not part of this offer.

Rechtliche Hinweise

Achtung! Nicht für Kinder unter 36 Monaten geeignet.

Achtung! Nicht auf Augen oder Gesicht zielen.

Die maximale kinetische Energie liegt bei <0.5Joule.

Um Verletzungen zu vermeiden: Nur Darts oder Pfeile verwenden, die speziell für dieses Produkt entwickelt wurden. Darts, Pfeile und Blaster nicht verändern. Die Schussweiten sind Schätzwerte und basieren auf Testdaten. Die tatsächlichen Ergebnisse des Blasters sind unterschiedlich und hängen vom Zustand der Darts und anderen Faktoren ab.

Altersempfehlung: ab 8 Jahre

Save this product for later


Praktische Accessoires für mehr Ordnung


Für die Skadis® Lochwand

Vollständig kompatibel mit der IKEA® Lochwand Skadis®.

Erhältlich in vielen verschiedenen Farben.

Wir verwenden nur eine Sorte hochwertiges PLA.

Weiterlesen
Share by: