NG-1 v6.0 'Snub Nose' Kurzlauf (fertig montiert und getestet)
The NG-1 (v6.0) is a semi-automatic, high performance fly wheel blaster, designed to launch full size foam darts using standard mags. All parts are designed and optimized for 3D printing. In order to boost performance and future development potential, the design is based around larger ‘380’ motors. The design is highly modular to allow for future modifications while being cost effective.
- Operation: Semi-automatic
- Operating voltage: 7.2V (nominal), 2s LiIon setup
- Material: PLA (and others)
What is in the package?
- Main body, 3D printed using PLA/ABS
- Screws and nuts (stainless)
- Cables and connector (XT60)
- 2 Motoren
- Shrink tubing
- Small parts (spring, etc)
- Assembly manual (download here, or see video below)
The breech and fly wheel setup is easly accessible with a cover from the top of the gun.
The motors are rated for a 2s setup (max 8.4V). Batteries are not part of this offer (difficulties with shipping etc). The balster is equipped with a XT60 connector (both male and female).
The kit comes with a comprehensive assembly manual. Some of the printed parts have support structure or brim, which has to be removed with a sharp knive. All parts are screwed together. A comprehensive assembly manual is included. You may also refer to the assembly video below:
What tools do you need?
- Screw drivers
- Hex keys
- Sharp knive
- Soldering iron
We use PLA for the most of the parts of the blaster. PLA does not like heat. Make sure to keep the blaster below 30°C. Hence no direct sun light for a long period of time. The motors are isolated from the PLA body; if they tend to overheat, try giving them a break as well. If you need the blaster printed from a high tmperature resistant material, feel free to get in touch.
Colors can be selected from the drop down menu. If you would like a specific color combination please use the color configuration tool: www.ng1.my3dbase.com
Simply take a screenshot of your favorite color combination and send it to us so we can manufacture your NG-1 to your specification.
Do not aim at eyes or face. Do not modify darts or dart blaster. This product is only intended to be used as outlined in the accompanying instruction manual. This item is not a toy, keep away
from children. In no event, regardless of cause, shall my3dbase GmbH be liable for any indirect, special, incidental, punitive or consequential damages of any kind as a result of this product, whether arising under breach of contract, tort (including negligence), strict liability or otherwise, and whether based on this agreement or otherwise, even if advised of the possibility of such damages.
Magazine and battery are not part of this offer.